Cek, LEGO Bricktales: Rebuild the Old Cargo Lift | Caribbean Puzzle Solution Disini!

Posted on

Jika sobat ingin mencari artikel tentang LEGO Bricktales: Rebuild the Old Cargo Lift | Caribbean Puzzle Solution disini tempatnya . Baca artikel tentang LEGO Bricktales: Rebuild the Old Cargo Lift | Caribbean Puzzle Solution .

The new LEGO Bricktales from ClockStone has surprised the gaming community with its great game features.

In this game, you will be able to make use of your LEGO building hobby where you will be asked to craft different buildings and infrastructures. Level up your LEGO skills by doing these puzzles.

One of the puzzles that you will encounter is the Crane Puzzle where you will need to build a crane arm and counterweight for the crane. However, if you find this task too difficult, here is the perfect solution for you.

We’ve put together this guide to help you get ahead in your game by finishing this mission in LEGO Bricktales.

Build the boom and counterweight to solve the puzzle of the crane in LEGO Bricktales

You can start this task by standing on the anthropomorphic hammer icon near the construction worker Amelie. Press the X button to enter.

Source: Trophy Tom

Once inside, you will be shown the work area. You will see the different parts that you can use with different numbers of pieces.

Source: Trophy Tom

Start with the square piece at the bottom. Use one piece and attach it to the top of the gray cutting pile.

Source: Trophy Tom

Next, get a 6x wide piece of brick and attach its center on top of the yellow square. By this time, it should look like a large “T”.

Source: Trophy Tom

Next, get 2 pieces of bricks 10x long in the corner as shown in the picture. Both attacked under the previous thick bricks

It should look like this after you do this.

Next, get one of the gray squares and attach it to the top of the two thin bricks you laid earlier. Make sure to place it next to the thick brick on top.

Find 6x thinner bricks and get two of them. Place it on the end of the two thin layers you attached earlier. Be sure to attach two points to each. This should be how it looks now.

Now, get one of the 8x pieces with 2 points. Put it on the gap at the top to complete the first part.

It’s time to add the widget where the lever will be attached. Put it on the end of the last two pieces you put on. Once added, get one of the bricks 5x thick and place it on the right wing of your base. Make sure to leave four points disconnected.

This is how it should look.

Get 2 pieces of thin and 4x tall bricks. Lay it next to the bricks you installed earlier. Next, get one of the 4x thick long bricks and place it under the thicker bricks. Use the 4 point allowance you left earlier to put it under.

It should look like this now.

Grab a piece of the 4 x gray rectangle piece. Attach it to the top of the bricks you just laid. Then get one gray square and add it to the space at the end.

Use one of the long bricks 3x thick and attach it to the gray bricks you just laid. Then add two more bricks of the same type at the bottom of the same spot. So, it should look like this now.

To try it out, tap simulation It will move with a weight on top.

And voila! You are already done with the puzzle.