Jika sobat ingin mencari artikel tentang Barotrauma: How to Activate the New Beacon Station disini tempatnya . Baca artikel tentang Barotrauma: How to Activate the New Beacon Station .
Beacon stations are structures in the game that can transmit sonar signals over long distances. However, before you can use it, you need to activate it first. With the latest update of Barotrauma, a total of three new beacon stations have been added.
In this guide, I will show you how you can activate it.
How to activate the new beacon station in Barotrauma
As with the other beacon stations in the game, you’ll first need to head to the new station’s location. Once you arrive, you will notice that the only way to enter the station is through a locked door at the top of the station.
All credits for this guide go to Dranka. You can check out his video for a more detailed view of this guide.
However, as the new stations have a new layout, solving them will require a different approach. Unlike previous stations that required you to cut walls through the plasma cutter, the new stations require a little bit of problem solving.
For this door, the door is controlled by wires and/or buttons, and you need to fix it first to open it. To get started, just follow these steps:
- Click the button near the door, then pull the blue wire to the hotkey bar.
- Click on the door and connect the blue wire to Toggle_State.
- Click the button again and connect the blue color to Signal_Out.
- Once done, the door will then open.
Head inside the station and walk downhill until you come to a room with a saltwater reactor with a handful of batteries.
You need to fix all four batteries in the room. Just make sure you have a skill level 55 in electrical engineering, otherwise you won’t be able to fix it.
Next, make sure that the batteries are connected to the power slot in the lower junction box. Also, you should also connect the lower crossover to the upper one. Finally, connect the upper junction box to the junction box on the upper floor. This will transfer the power to the rest of the station.
After repairing the batteries, you will notice that there is a button and a lever near the on/off mark. Simply push the buttons to turn on the water intake valve and pull the lever to activate the reactor. Then start the pump and increase the pumping speed to drain the water inside the station.
Activate the sonar function
Head to the top of the station and find the junction box. After that, all you have to do is make sure that the navigation station is connected to it. Once this is done, fix the device next to the junction box.
After fixing the device, interact with it and pull the lever to activate the sonar.